06 — Fabric

Sanforized vs. Unsanforized, Raw vs. One-Wash: The Complete Guide

Navigating the world of Japanese selvedge denim often comes down to four fundamental terms: Sanforized, Unsanforized, Raw, and One-Wash. While they are frequently mixed and matched, they refer to two completely different stages of production: how the fabric is stabilized at the mill, and whether it has been laundered before it reaches your hands.

Understanding these distinctions ensures you get the right fit, the right texture, and the exact fade profile you want.

The Fabric Level: Sanforized vs. Unsanforized

This distinction happens at the textile mill right after the denim is woven off the loom.

Feature Sanforized Unsanforized (Loomstate)
Mill Treatment Heat, steam, rubber belt compaction None (straight off the loom)
Expected Shrinkage 1% to 3% (negligible) 8% to 10% (1–2 tag sizes)
Texture Flatter, uniform, tame Hairy, uneven, raw loom chatter
Sizing Approach True to size / match measurements Size up (unless One-Wash)
Leg Twist Minimal to none Pronounced (classic vintage trait)
  • Sanforized DenimThe Process: Invented by Sanford Lockwood Cluett in the late 1920s, sanforization feeds raw fabric through a series of steam rollers and rubber blankets to mechanically compress and pre-shrink the cotton fibres before cutting and sewing.What to Expect: Predictability. If the waist measures 34 inches on the rack, it will stay roughly 34 inches after a soak. The break-in is straightforward, and the fabric surface is smoother and more uniform right out of the box.
  • Unsanforized Denim (Loomstate)The Process: Pure, untreated fabric taken straight from the shuttle loom to the cutting table. It skips all modern mechanical stabilization, singeing, or skewing.What to Expect: Extreme character and significant shrinkage. When loomstate denim meets hot water for the first time, the loose cotton fibres tighten violently, shedding roughly 8–10% of their total volume. The resulting texture is wavy, crinkly, and dense with visible slub and nep.Leg Twist: Because unsanforized twill shrinks along the natural directional pull of the weave, the outseam will naturally rotate forward on one leg. To heritage purists, this is not a flaw — it is the definitive badge of true vintage-style construction.

The Finish Level: Raw vs. One-Wash

This distinction refers to what happens to the finished garment after it has been stitched together at the atelier.

  • Raw (Rigid / Dry)What It Is: The jeans have never touched water. They still carry all the natural loom starch, sizing agents, and surface rigidity from the weaving process.What to Expect: Stiff, cardboard-like drape on day one. Raw denim creates sharp, crisp folds around your joints immediately. If the denim is both unsanforized and raw, you must give them an initial hot soak to purge the shrinkage before you begin wearing them.
  • One-Wash (Factory Soaked)What It Is: The maker gives the completed unsanforized jeans a single industrial wash (often in pure Japanese spring water or seawater) and line-dries them before sending them to retailers.What to Expect: The best of both worlds. One-wash treatment removes 95–100% of the unpredictable shrinkage and flushes out stiff factory starch, while leaving the deep indigo dye and textured loomstate topography completely intact. You get the rich, slubby feel of unsanforized denim without any of the sizing guesswork.

Sizing & Buying Strategy

  • Sanforized RawBuy your exact waist size based on actual garment measurements. Expect minor stretching in the waist (approx. 0.5–1 inch) with wear, which snaps back upon washing.
  • Unsanforized RawSize up 1 to 2 tag sizes. The waist will shrink 1–2 inches and the inseam will lose 2–3 inches upon the first soak.
  • Unsanforized One-WashBuy your true measured size. The shrinkage has already been pulled out by the workshop. The denim will relax slightly with body warmth and movement.

Insights from the Workshop

“From inside the workshop, the conversation around RAW versus one wash is much simpler than people imagine. More than ninety percent of our Japanese customers choose one wash. That’s just normal here.”

“I understand the feeling that ‘one wash is cheating.’ I used to think that way too, back when I first discovered denim as a teenager. But once you start making jeans for a living, your perspective changes. RAW denim simply means the work isn’t finished yet. Washing, drying, and carefully ironing each pair takes time. When someone buys RAW, honestly, it saves us the trouble.”

“The important thing is this: Japanese denim doesn’t lose anything by being one wash. It still fades beautifully. It still ages with character. The fabric is strong enough, and the dyeing is good enough, that one wash doesn’t take anything away.”

“There’s also how denim looks on the shelf. RAW denim doesn’t show its best face. The sizing is still on the surface, so the indigo looks a little cloudy and dull. For that reason, we only display one wash jeans. If someone insists on RAW, we have them try the one wash pair first to check the fit, then hand them the RAW pair to buy. Almost every time, they try the one wash and say, ‘Actually… this is fine.’”

“And there’s a cultural difference as well. Overseas, people treat Japanese denim like something mythical. Here in Japan, it’s just part of everyday life. Even in Okayama — the so-called holy land of denim — people say, ‘Is it really that special? I don’t get it.’ That’s the honest workshop view.”

Workshop founder, Okayama